Triner Scale T-1000 TELESET - Manual (Page 6)

7 6
Operator manual T-1000 TELESET
2 Safety tips
Your T-1000 postage meter complies with standard safety regulations for
office equipment of this type. Before operating your T-1000, read the following
tips to assure safe operation.
• After the T-1000 has been in weather below 10 degrees Celsius, wait at
least two hours before installation.
• This equipment is designed for connection to a grounded outlet. The three-
prong plug is an important safety feature. To reduce the risk of shock or
damage to your equipment, do not disable this feature.
• If any liquid is spilled onto your T-1000, disconnect the plug from the outlet
immediately. Before connecting the T-1000 again, have it checked by your
local service representative.
• Interface cables should not be handled unless all connected machines
are turned off. Never attempt to plug or unplug the interface or data
transmission cables during a thunderstorm.
• Repairs to your T-1000 must be conducted by an authorized Francotyp-
Postalia representative.
• Use only equipment and supplies approved by Francotyp-Postalia.
Safety tips
8 Basic programming
__________________________________________________________________________________________________
25
8.1 Changing the date and time
_________________________________________________________________________
25
8.2 Programming ‘High postage’
_______________________________________________________________________
26
8.3 Low postage warning
_____________________________________________________________________________________
27
9 TELESET postage resetting
_________________________________________________________________________________
29
9.1 Resetting postage
____________________________________________________________________________________________
29
9.2 TELESET self diagnostics
____________________________________________________________________________
32
9.3 Security features
______________________________________________________________________________________________
34
10 Maintenance, upkeep and service
_____________________________________________________________________
35
10.1 Cleaning
______________________________________________________________________________________________________________
35
10.2 Changing the ribbon cassette
_____________________________________________________________________
36
11 Troubleshooting
_________________________________________________________________________________________________________
37
12 FCC-Requirements
___________________________________________________________________________________________________
39
13 Technical specifications
_________________________________________________________________________________________
41
14 Service
____________________________________________________________________________________________________________________________
43