CLIFFORD RSX3.2 User Manual
Page 47
44
© 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d
ready circuitry for the starter interrupt, however installation may
require additional labor.
Input:
A physical connection to the system. An input can be
provided by a sensor, pinswitch or by existing systems in the
vehicle, such as ignition or courtesy lights.
In-vehicle status LED:
A light mounted at a discretionary location
inside the vehicle. It is used to indicate the status of your system.
Shock Sensor:
This system has a dual zone shock sensor. This
sensor is mounted in the vehicle and designed to pick up impacts
to the vehicle or glass.
2-Way Remote:
A hand-held, remote control which operates the
various functions of your system.
Trigger or Triggered Sequence:
This is what happens when the
alarm “goes off ” or “trips.” The triggered sequence of your
system consists of the siren sounding and parking lights flashing
for the programmed duration.
Valet Button:
A small push button switch mounted at a discre-
tionary location inside the vehicle. It is used to override the
starter interrupt when a 2-way remote is lost or damaged, or to
enter or exit Valet Mode.
Warning Zone Response:
Lighter impacts to the vehicle will
generate the Warning Zone response. It consists of several
seconds of siren chirps and parking light flashes.