TYREDOG TD-1400A-X4 - Manual (Page 15)

V1.0-FB06 (1105232) 15
The installation of tire pressure sensors
As each sensor has its own position, you have to make sure its pre-set
position. When inserting batteries in every sensors please don’t mix up
sensor caps and every sensors have own positions and sensors map
could give guidance for user to install. Here is sensor map.
(1) means “ Front Left Tire ”.
(2) means “ Front Rear Tire”.
(3) means “ Rear Left Tire ”
(4) means “ Rear Right Tire ”.
(5) This is symbol for a spare tire.
Note：
1. Make sure battery polarity correct when insert it.
2. Make sure sensor body won’t mix up with other sensor cap.
When batteries are exhausted soon, the battery level will be
displayed on the TFT monitor.
(1) (2)
(4) (3)
(5)