TYREDOG TD-1400A-X4 - Manual (Page 28)

V1.0-FB06 (1105232) 28
 Pressure unit setting
 Temperature unit setting
 Learning mode
When you need to replace any of existing sensors with learnable sensor,
you will need this function. Normally, original sensor has its own
identified number and you won’t need to do anything with sensors.
However, whenever you lost your original sensor or sensor is broken,
you will need to purchase a new ‘learnable sensor’ to replace. The
‘learnable’ sensor can be bought in your local dealer.
After change to learning mode,system can let re-recognize new sensor,
As the photo below
：
Pressure unit setting
Temperature
unit setting