TYREDOG TD-1400A-X4 User Manual
Page 4
V1.0-FB06 (1105232)
4
Precautions
1. Please do not operate this device during drive.
2. Due to rubber valve stem aging under high temperature and expose
under the sun, which may cause crack on the rubber stem, therefore,
we recommended metal type of valve stem.
3. Please choose the installation location carefully so that the TFT monitor
will not interfere driver when driving.
i. Please make sure TFT monitor firmly fixed to the front windshield or
dashboard.
ii. When read through tire pressure figures from TFT monitor, please
also take care of driving safety.
4. Please make sure the TFT display can receive signals from all tire
pressure sensors.
5. Tyredog TPMS has unique anti-theft tool to prevent sensor being stolen.
You can decide whether install or not.
6. Please double confirm if sensors are fitted tightly. If necessary, please
spreading detergent water on the valve stem to check any air leakage.
7. If tire pressure is getting down or dropping quickly, please stop car
immediately to find out if tire is deflated or another other problem is
happening.
8. The monitor will automatically make connections in whole system
when car starts to run. It is normal that some tire pressure figures
might not be updated immediately due to there is no change of tire
pressure in those tires.
9. Tyredog TPMS has mechanism to avoid interfering /being interfered