0 system version, 0 system overview – USL CM-8E User Manual
Page 9
9
3.0 System Version
The CM-8E is continuously being improved. New features are added through firmware. This
manual describes the CM-8E versions available at this writing.
Firmware/software versions for the systems described in this manual are listed in the table
below:
Check websi
4.0 System Overview
4.1
System Description
The CM-8E expands upon the standard booth monitor to allow network monitoring of cinema
audio for quality control purposes. Network monitoring can meet the needs of a large network
operations center, or allow the manager to monitor auditorium audio from his or her office. Of
course, the CM-8E also serves the standard booth monitor purpose of allowing listening to
various audio channels through the front panel speaker or headphones. Two user interfaces
(the front panel and a web browser interface) are provided. The capabilities of each are listed
below.
4.1.1
Front Panel User Interface
Push button selection of audio channels to listen to, including HI and VI-N
Listen to processor output or amplifier output
Listen to individual bands of biamp crossover whether located in processor or
amplifier
LED level indicator of channels being listened to
Front panel volume control controls speaker and headphones
Internal speaker
Front panel headphone jack
4.1.2
Network User Interface
Web browser based (no software to install, use any operating system, monitor on
desktop or tablet computer)
Component
Version
P32
140714
Boot loader
130806
P24
130820