VACUUBRAND BVC basic G - Manual (Page 25)

page 25 of 35
BVC with polypropylene bottle
Insert hose connection (1a) with seal ring (2) or
coupling (1b) with seal ring (2) in the screw cap.
Assemble hose (4) under the screw cap to
the lead through and secure lead through with
counter nut (3).
Screw screw cap to bottle.
Assemble filter.
Assemble VHC pro .
1a
2
3
4
1b
Assembling quick coupling bottle - pump unit
(extension set)
Remove hose.
Disassemble hose nozzle.
Hold counter piece with open-ended wrench
size 19 mm.
Attention: The extension set “Quick coupling bottle - pump unit”
is designated for two different extension versions. Therefore the
set consists of parts, which may not be necessary in the individual
case.
Redundant parts are not credited by VACUUBRAND.
Assembling to support connection