Load the ribbon – Compaq 5532 User Manual
Page 32
Advertising
Chapter 2
Install Basic Components
32
Load the Ribbon
1.
Refer to the ribbon path diagram molded onto the shuttle cover (see
“Printer Component Locations” on
).
2.
Open the printer cover.
3.
Raise the forms thickness lever (1) as far as it will go.
4.
Open the tractor doors (2).
5.
Squeeze the right hub latch (3) and place the full spool on the right
hub. Be sure the ribbon feeds off the outside of the spool. Press the
spool down until the hub latch snaps into place.
2
1
3
Advertising