Compaq 5532 User Manual
Page 36
Advertising
Chapter 2
Install Basic Components
36
6.
Make sure the leading edge of the first sheet of paper is parallel to
the tractor splined shaft (8). If the paper is misaligned, reload it onto
the tractor sprockets until its edge is parallel to the splined shaft.
7.
Slide the right tractor to remove paper slack or to adjust for various
paper widths. Lock the tractor.
8.
After both tractors are secured, you may use the horizontal
adjustment knob (9) to make fine horizontal paper adjustments.
9
8
10
Advertising