Compaq 5532 User Manual
Page 45
Control Panel Keys
45
SHIFT
The printer must be offline to perform the following functions:
•
Press SHIFT+CLEAR to reset the PCL-II emulation.
•
Press SHIFT+L.P.I. Adj to access the line spacing menu. Press
PREV or NEXT to scroll through the options.
•
Press SHIFT+Page L. Adj to access the form length menu in lines
or inches. The page length is selected by lines/page or inches/
page, depending on which option is chosen in the PCL-II submenu.
•
Press SHIFT+
=
to micro step the paper upward in 1/72 inch
increments.
•
Press SHIFT+
>
to micro step the paper downward in 1/72 inch
increments.
SET TOF
Sets the top-of-form on the printer. This key is active only when the
printer is offline and will not operate if the printer is in a fault condition.
The paper moves down to the print position and aligns to the top-of-
form. See
for the complete top-of-form setting procedure.
NOTE: If there is any data in the buffer, the paper will move to the last
print position.
ENTER
When navigating the configuration menus, ENTER selects the currently
displayed option value as the active value. An asterisk (*) appears next
to the active value on the display. ENTER is also used for starting and
stopping printer tests and generating a configuration printout.
NOTE: The ENTER key must be unlocked in order to function. See
UP + DOWN, below.