Compaq LA36 - Manual (Page 59)

4-5
Using Set-Up Mode
Overview of the Set-Up Mode
When you enter the Set-Up mode, the following
<FUNCTIONS>
menu is printed:
< F U N C T I O N S >
MACRO 1 MACRO 2 PRINT INSTALL ADJUST TESTS RCALL-FACT MENU-
A C C E S S S A V E & E X I T
The following table summarizes the purpose of each function.
Set-Up Mode Functions
Function Purpose
MACRO 1
and
MACRO 2
Assigns print features to
MACRO 1
and
MACRO 2
.
PRINT
Prints the Printer Configuration.
INSTALL
Changes the Set-Up menu language, computer interface, and
paper feed control options.
ADJUST
Changes the top-of-form fine adjustment options.
TESTS
Runs the printing test and hex dumps.
RCALL-FACT
Resets factory settings in
MACRO 1
,
MACRO 2
,
INSTALL
,
and
ADJUST
.
MENU-ACCES
Restricts access to Set-Up functions from the control panel.
SAVE&EXIT
Exits the Set-Up mode and saves any changes made in the
Set-Up mode.
To select a function from the
<FUNCTIONS>
menu:
1. Repeatedly press the button or the button to position the red cursor on the
plastic print guide under the function you require.
2. Press the button or the button to select the function. If the function has options
and values, the printer prints the first option and its values. The
MACRO 1
,
MACRO 2
,
INSTALL
,
ADJUST
,
TESTS
, and
MENU-ACCES
functions contain options that have
selectable values. The other functions have neither options nor values.