Compaq LA36 - Manual (Page 80)

4-26
Using Set-Up Mode
INSTALL Options and Values
• Overprinted values are the factory settings.
I N S T A L L
Options Values Description
<LANGUAGE>
Specify a language to be used to print the Set-Up
menu functions and options.
ENGLISH
English
DEUTSCH
German
ESPANOL
Spanish
FRANCAIS
French
ITALIANO
Italian
<TEAR>
Specify the (auto) start timing of tear off feeding.
AUTO 1 SEC
1 second after data stops from the computer.
AUTO 2 SEC
2 seconds after data stops from the computer.
AUTO 3 SEC
3 seconds after data stops from the computer.
AUTO 4 SEC
4 seconds after data stops from the computer.
AUTO 5 SEC
5 seconds after data stops from the computer.
MANUAL
Feed the paper for tear-off when the Pause button is
pressed.
NO TEAR
Tear off feeding is inhibited under any conditions.
Specify this setting for labels that tend to peel off
during backward feeding.
<S-SHEET LD>
Specify the (auto) start timing of single sheet loading.
AUTO 1 SEC
1 second after a single sheet is set on the platen.
AUTO 2 SEC
2 seconds after a single sheet is set on the platen.
AUTO 3 SEC
3 seconds after a single sheet is set on the platen.
AUTO 4 SEC
4 seconds after a single sheet is set on the platen.
AUTO 5 SEC
5 seconds after a single sheet is set on the platen.
MANUAL
Load a single sheet when the FF/Load button is
pressed.
<ERROR BEEP>
Enable or disable the printer status buzzer when a
fault condition occurs.
O N E
One beep for a period of about 500 ms
CONTINUOUS
Buzzer on until the fault condition is cleared.
OFF
Buzzer off under any condition.
(Single Sheet
Load)