Removing the ssr-520 cables, Removing the ssr-520 cables -11 – Cabletron Systems 520 User Manual
Page 41
Advertising
Installing and Cabling
2-11
Removing the SSR-520 Cables
To remove cables from the SSR-520 router, see Figure 2-6 and complete the
following steps.
Figure 2-6.
Removing the SSR-520 Cables
Step
Action
1
Press the release tab (1) on the cable plug, then pull out the
cable.
2
Push in the release tabs (2) on the side of the WAN serial cable
connector, then pull out the cable.
Advertising
This manual is related to the following products: