Cabletron Systems 520 - Manual (Page 13)

xi
Preface
Preface
Overview
This manual describes how to install the SmartSwitch Router 510 and SmartSwitch
Router 520 (also referred to in this manual as SSR-510 and SSR-520). It also provides
problem solving information, connector pin assignments, and other general information.
Using This Guide
Read through this guide completely to understand the router features, capabilities, and
Local Management functions. A general working knowledge of Ethernet and IEEE 802.3
type data communications networks and their physical layer components is helpful when
using these devices.
Intended Audience
This manual is intended for the hardware installer. The installer is responsible for ensuring
that the hardware is installed and tested. It shows how to install when the site is verified
and the cables and devices are in place. This guide shows how to verify the site, install
cables and devices and troubleshoot problems. The person installing software can then
verify the system installation.
Preface