Connecting the console port, Connecting the console port -3 – Cabletron Systems 520 User Manual
Page 45
Advertising
Connecting the Console Port Cable
3-3
Connecting the Console Port
The console port connection is made through the console port on the router.
To connect the console port on the SSR-510 or the SSR-520 routers, complete
the following steps:
The router’s console port is shown in Figure 3-1. The legend identifying the
console port cabling follows the figure.
Step
Action
1
Ensure that the transmit and receive baud rates on the console port
device are set to 9600 baud.
2
Connect the console port device to the console port connector on
the router.
Advertising
This manual is related to the following products: