Cabletron Systems 520 - Manual (Page 50)

Configuring the Router
4-4
Console Screens
After the configuration exists in the clearVISN Router Configurator, for new
routers, the following screens show the power-up sequence of the router being
loaded by EasyStart:
SmrtSwtch Rtr 5xx
===============================================================
SmrtSwtch Rtr 5xx INSTALLATION MENU
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
To fully manage this device telnet to one of the
following IP addresses or select item [3] below.
Out-of-Band: Not Configured
In-Band : None Operational or Configured
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[1] Restart with Factory Defaults
[2] Restart with Current Settings
[3] Go to Local Console
==================================================================
Enter selection : 00:00:05 EZ.001: Starting.
00:00:06 EZ.007: Waiting up to 6 seconds for devices to pass self-test.
00:00:08 AI.001: Changed params on ifc 1 (Serial Datalink),
from PSL to Frame Relay.
00:00:08 EZ.002: Changed one or more cfg params.
00:00:08 BTP.010: net 0, int Eth/0, Sent client request (htype: 1)
00:00:08 BTP.011: net 1, int SL/0, Could not snd client req because: Ifc not up
00:00:08 BTP.011: net 2, int ISDN/0, Could not snd client req because: Ifc type not suptd
00:00:08 BTP.007: net 0, int Eth/0, Valid Resp,
Server: Unknown(130.130.130.28),
Bootfile: C:\Program Files\Cabletron\RConfig\DRS\rf10935f.drs.SRM
VendOpts config file: None
IpAddr 100.100.100.47, gwAddr 0.0.0.0
00:00:08 BTP.012: net 0, int Eth/0 No cfile in vendOptions, using bootfile fld instead
00:00:08 EZ.004: Rcvd boot info: ipAddr 100.100.100.47,
ipMask 255.255.255.0 on intf 0
00:00:08 EZ.009: *** Restarting Router ***
Continued on the next page . . .