Cabletron Systems 520 - Manual (Page 63)

Configuring the Router
4-17
[3] Set Default Gateway
This option sets the default gateway, if necessary, for the in-band interface.
This is the address of a router that the router will use when communicating to
a remote host. The default gateway address must be an address in the same
subnet as your in-band address.
The following example shows the dialog associated with this selection.
Enter selection : 3
SmrtSwtch Rtr 5xx
=========================================================
SET IN-BAND INTERFACE DEFAULT GATEWAY ADDRESS
example: 134.12.13.14
To delete the address, enter 0 in the appropriate
Format: The standard 4-octet dotted decimal notation in which
each octet of the address is represented as a decimal
value, separated by a "." character.
address field.
========================================================
Default Gateway []: 126.43.24.10 <Return>
Default Gateway Address Set.
Press Return for IP Configuration Menu . . .