MirOil 75HS - Manual (Page 5)

Assembly of Models HD / HS
Step 3.
Remove pin, turn &
remount crank
handle from
shipping position to
the correct position
for pumping.
Reinstall pin.
Step 4.
Carefully attach the
quick coupling on the
end of the Discharge
Hose to the mating
fitting on the
pump/handle
assembly
The Filter Machine is ready for use.
Be sure to read the instructions
before placing machine into service.
Assembled
Model 55HD
Step 1.
Slide pump/handle
assembly into
receiver tubes in
basin
Step 2 A .
Insert tube at end of hose (from hot oil
pump suction) into the socket on the
side of the Filter Basin until the tube is
fully seated.
HS
Step 2 B .
Insert nipple at end of hose
(from hot oil pump suction) into
the coupler on the side of the
Filter Basin until the nipple is
fully seated. Press lever arms
down for a secure fit.
Assembled
Model 55HS
Pull on coupler to insure proper attachment.
Use attached safety pin to keep the
lever arms in locked position.