MirOil 75HS - Manual (Page 6)

Filter Procedure for Model HD
for use with fryers with drain valves.
CAUTION: Couple the hose. Pull hard on the hose to make sure the lever arms are locked.
Make sure hose nozzle is in the nozzle holder tube on the pump.
Step 1 - Lock wheel stabilizer into place. (See fig. 1) The current pump system has a handle brake instead
of black knob shown below
TM Step 2 - Place EZ Flow Filter across the Basin.
Carefully open the fryer valve to drain oil into the filter basin through the filter bag.
Step 3 - Close the drain valve turn pump to return the oil back to the fryer
Step 4 - Discard heavy crumb load before filtering the next fryer. Use a bus tray or carton to allow the
crumb to cool because hot crumb will melt plastic garbage can liners.
Clean your filter under hot water spray. Store the filter in the filter basin to avoid accidental damage.
Do not wash the filter in a dishwasher or use soap. The least residue of soap is harmful to the oil.
If solid oil or shortening is used, before storing the filter machine, turn the pump handle
clockwise to empty the oil from the pump cavity.
Uncouple the hose and store it in a hanging position to prevent a fat plug from forming when it
collects and solidifies at a loop or bend of the hose.
More notes for great fried food:
1. Add
fryliquid
™ antioxidant to your oil after filtering and/or before each meal session. This will
capture oil breakdown substances as they form in the oil and prevent oil breakdown reactions.
2. Filter once a day when fryliquid
™ antioxidant is used unless crumb load is extremely heavy.
3. Follow the filtering and freshening procedures described in your brochure for fryliquid
™
antioxidant and the New Frying Technology to choose an oil management program for your fry station.
For assistance call . . . . 1.800.523.9844
Filter oil at temperatures from
300°F (148°C) to 350°F (176°C)
Division of Oil Process Systems Inc.
602 North Tacoma Street Allentown, Pennsylvania 18109
PHONE: 610 437-4618 FAX: 610 437-3377 E-mail: [email protected] Web: www.miroil.com
Fryer
Fig. 1
There is NO need to remove filter bag
from holder / frame to clean.