Crest Audio X-SERIES X 20R - Manual (Page 37)

Front Panel Features
AUX OUT 1-2 Level Control
This is the master stereo output level control for the AUX 1/2 pair.
Aux 1-2 AFL
This button assigns the AUX 1/2 stereo pair to the solo system. Since it
is AFL, the signal is monitored after the AUX insert and master level
control. Auxes 1 & 2 show up in stereo in the system (1 on the left and
2 on the right).
AUX OUT 3, 4, 5 & 6 Level Control
These are the master output level controls for Auxes 3, 4, 5 & 6.
Aux 3, 4, 5, & 6 AFL
These buttons assign Auxes 3, 4, 5 & 6 to the solo system. Since they
are AFL, the signals are monitored after the AUX inserts and master
level controls. These Auxes are always monitored as a mono signal in
the Solo system.
Master Section
3
p. 37