Crest Audio X-SERIES X 20R - Manual (Page 45)

Front Panel Features
Mono PK/SIG LED
Green/Red - Flashes to indicate the Mono master level. Green during normal oper-
ation and red to indicate overload either at the mix amp or at the fader.
Left/Right PK/SIG LED
Green/Red - Flashes to indicate the summed Left/Right master levels. Green dur-
ing normal operation and red to indicate overload either at the mix amps or at
the faders.
MONO AFL
Assigns the post-fader Mono master signal to Solo bus, and illuminates the Peak
(red) LED.
MONO, LEFT & RIGHT Master faders (100mm)
These are the master level controls for the main Left, Right and Mono outputs.
ALT OUT (L-R)
Sets the level for the Alternate Left & Right outputs. These outputs are made up of
the pre-fader Left/Right mix. If the ADD MONO TO PHONES & ALT OUT button
is depressed (recessed switch, located near headphone jack), the pre-fader
MONO bus is added in and becomes part of the ALT OUT signal as well. Jacks are
located on the rear panel. 1/4” TRS and RCA jacks are provided for easy hookup.
Master Section
3
p. 45