Canon DR-5060F - Manual (Page 16)

14 Names and Functions of Parts
■ Operation panel
(1) Function keys
(2) Remaining film
indicator
(3) Backup key
(4) Space/Trailer key
(5) Count Only key
(6) Clear/Stop key
(7) New File key
(8) Start key
(9) Feeding Option key
(10) Brightness key
(11) Indicator lamps
(12) Counter display
A
FILM E F
Feeding Option
New File
Count Only
Manual
Auto
Semi-Auto
1 2 3 4 5 6
Space/Trailer Backup
Scanner
(1) Function keys
The following functions and settings can be registered to function keys so that
they can be called up later by one-touch operation. (See “Function Key
Settings” P. 52)
● Manual Thickness Adjustment
● Fixed Thickness Mode
● Double Feed Detection
● Imprinter
● Film Density
● Odometer Indication
● Page Address Indication
● File Address Indication
● Restore Memorized Setting
(2) Remaining film indicator
This indicator shows the amount of remaining film when a camera unit loaded
with film is placed on this unit. All LEDs light when the amount of remaining film
is 100%. These LEDs go out from the rightmost LED as the film in the camera
unit is used up. Only the leftmost LED blinks when film has almost run out. The
rightmost LED also blinks when film is being fed during photography or when
spacing the film.
MEMO
The end of film detection margin can be changed in the user mode. (See
“Setting in the User Mode” P. 56)