Canon DR-5060F - Manual (Page 82)

80 Daily Cleaning
NOTE
● If a roller on the feed unit becomes loose (Figure A), re-attach it as shown in
Figure B.
● Before you return the upper unit to its original position, be sure to lower the
lever on the feed unit (Figure B). If the document is scanned with the lever at
the up position, a paper feed error will occur.
Backup
Manual Auto Semi-Auto
(A) (B)
9
To close the feed unit, push the feed unit inwards as far as
possible, and then release the upper unit.
When you release the feed unit, it begins to slowly fall down. Do not apply
unnecessary force to push the feed unit down. Doing so might damage the
scanner.
Backup
Manual
Auto
Semi-Auto
10
When the feed unit has fallen as far as it can go, press down firmly
on both sides to close it.
If you press the feed unit down on only one side, the opposite side will not be
fully closed. Make sure that you hear it click into place.
Backup
n
ce
ly
Manual
Auto
Semi-Auto
3. Lower the lever.
2. Press this part.
1. Fit into the
deeper of the
two grooves.