With a laserdisc: programming and basic operation, Program the remote for your laserdisc, Basic operation – Sears 274.4279839 User Manual
Page 17: Laserdisc codes, Using your tv and remote
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
With a Laserdisc: Programming and Basic Operation
Refer to your Laserdiic owner's manual to hook up \/our Laserdisc Planer. The
remote may need to be programmed for your laserdisc. Use the codes below
or on the sheet packed in with your remote.
Using Your TV and Remote
Program the remote for
your laserdisc
Basic Operation
Laserdisc Codes
Pioneer....................... 33
ProScan...................... 33
RCA............................33
A. Point the remote at the audio
equipment and hold LDISC.
B. Enter the code for your brand
from the code list below.
C. Release LDISC.
D. Press ON/OFF. If nothing
happens, try pressing LDISC
and then ON/OFF.
A. Tune TV to channel 00, 03, or 04.
B. Point the remote at the
Laserdisc and press LDISC.
C. Press ON/OFF to turn it on.
D. Use the buttons on the remote
that relate to laserdisc functions.
Not all buttons highlighted mav
work with your laserdisc.
F. Press ON/OFF to turn it off.
14