Sound settings: speakers, Turn speakers on or off, Press done to save the setting – Sears 274.4279839 User Manual
Page 22: Adjusting your tv
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sound Settings: Speakers
Follow the steps below to turn the speakers on or off in your TV. The chart
below explains your options. This set incorporates special circuits which
enhance stereo imaging and effect when used with the TV s own speakers. If
external speakers are used the enhanced stereo effect may decrease.
Adjusting Your TV
1. Select the Setup Menu
Controls Alarm Adjust Setup
Autoproqram
Label 13
clear
Channel Memory: 13 Stored
Cable/Air: Cable
'V
VCR 1 Channel: Video
Cable Channel: 03
Speakers; Off
Press MENU repeatedly to select
the Setup menu. This menu is
white.
2. Highlight speakers
Controls Alarm Adjust
i
Setup
Auldpfogram
Label 13
clear
Channel Memory: 13 Stored
Cable/Air; Cable
VCR 1 Channel; Video
I Cable Channel; 03
I Speakers; Off
Press CHANNEL down until
Speakers is highlighted.
3. Turn Speakers on or off
4. Press DONE to save the
setting
Controls Alarm Adjust Setup
Autoprogram
Labe! 13
clear
Channel Memory: 13 Stored
Cable/Air: Cable
VCR 1 Channel; Video
Cable Channel; 03
Speakers; On
Press + or — to turn the speakers
on or off.
Press DONE to save the setting.
Speakers
On
Off
The sound comes from the T\''s
No sound comes from the TV.
internal speakers.
The sound is directed through the
speakers of an amplifier that is
connected to your TV.
19