Using advanced features, Setting your tv for antenna or cable, Highlight cable/air – Sears 274.4279839 User Manual
Page 29: Select cable or air, Press done to save the, Setting
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Advanced Features
Setting Your TV for Antenna or Cable
Your TV automatically adjusts this feature when the TV places channels
in memory (autoprogram). Follow the steps below to change the setting
as needed.
1. Select the Setup menu
13
Controls Alarm Adjust Setup
Autooroqram
1 Label 13
clear I
Channel Memory: 13 Stored
Cable/Air: Cable
I
VCR 1 Channel: 00
Press MENU repeatedly to select
the Setup menu. This menu is
white.
2. Highlight Cable/Air
13
Controls Alarm Adjust Setup
Autoprogram
Label 13
clear
1
Channel Memorv: 13 Stored
1
Cable/Air: Cable
VCR 1 Channel; 00
Press CHANNEL down to
highlight Cable/Air.
3. Select Cable or Air
4. Press DONE to save the
setting
13
Controls Alarm Adjust Setup
Autoprogram
Label 13
clear
1 Channel Memorv: 13 Stored 1
Cable/Air: Air
VCR 1 Channel: 00
A. Press + or — to select Cable or
Air. Select Cable if you have
cable . Select Air if you have a
home antenna connected to
your TV.
B. Press DONE to save the setting.
27