Sears 113.22643 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4:V-:-"-
TENSION
LEVER
AUXILiARY
MOUNTING HOLE
WORK SUPPORT
HEX SCREW
BELT
BED
TRACKING
KNOB
BED LOCKING
HEX SOCKET
HEAD SCREW
ON-OFF
SWITCH
MOUNTING
HOLE
WARNING: To avoid Injury from accidental start,
turn switch “OFF” and remove plug from power
source outlet before making any adjustments.
1. Work Support. Supports the workpiece o n the sand
ing belt.
2. Hex Socket Head Screw. Loosening screw allows
belt bed to be raised to the vertical position.
3. Tracking Knob. Turning knob counterclockwise
causes sanding belt to move towards the disc; tu ming
knob clockwise causes sanding belt to move away
from the disc.
^
4. Tension Lever. Sliding levertothe right releases the
sanding belt tension; sliding lever to the left applies
belt tension.
5. Table Lock Knob. Loosening knob allows the work
table to be tilted for bevel sanding. (Scale pointer on
table tnjnnion; scale attached to base.)
6. Auxiliary Mounting Hole. Allows table assembly to
be mounted for end sanding when the bed is placed
in vertical position.
7. On-Off Switch.
12