Sears 113.243311 - Manual (Page 16)

assembly
ON-OFF SWITCH
WAR N1N G: DO N ‘T CONNECT POWER COR D TO
ELECTRICAL OUTLET IN YOUR SHOP UNTIL
YOU ARE SURE THAT MOTOR ROTATION IS
CORRECT (SEE PAGE 5).
The On-Off Switch has a locking feature. THIS FEATURE
IS INTENDED TO PREVENT UNAUTHORIZED AND
POSSIBLY HAZARDOUS USE BY CHILDREN AND
OTHERS.
1. insert key into switch.
NOTE: Key is made of yellow plastic
2. To turn machine on, insert finger under switch lever and
pull end of switch out.
3. To turn machine OFF ... PUSH lever in.
Never leave the machine unattended until it has come
to a complete stop. Remove key and store remote from
band saw.
4. To lock switch in OFF position .. . hold switch IN wrth
one hand . .. REMOVE key with other hand.
W A R N I N G : F O R Y O U R O W N S A F E T Y ,
ALWAYS LOCK THE SWITCH "OFF" WHEN
MACHINE IS NOT IN USE . . . REMOVE KEY
AND KEEP IT IN A SAFE PLACE . . . ALSO . ..
IN THE EVENT OF A POWER FAILURE (ALL
OF YOUR LIGHTS GO OUT) TURN SWITCH
OFF . . . REMOVE THE KEY. THIS WILL
PREVENT THE MACHINE FROM STARTING
UP AGAIN WHEN THE POWER COMES BACK
ON.
16