Sears 113.243311 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
acSditional safety instructions
for band saw/sander
WARNING:
THE 5" BAND SAW PULLEY AND THE
2-1/2" MOTOR PULLEY FURNISHED, WILL RUN THE
BLADE
AT
APPROXIMATELY
900
RPM
iOH
2700
FEET PER MINUTE) WHEN USED WITH A 1725 RPM
MOTOR.
NEVER
SUBSTITUTE
THESE
PULLEYS
TO
INCREASE THIS SPEED BECAUSE IT COULD BE DAN
GEROUS.
WARNING:
DO
NOT
ALLOW
FAMILIARITY
{GAINED
FROM FREQUENT USE OF YOUR BAND SAW) TO
BECOME COMMONPLACE. ALWAYS REMEMBER THAT
A CARELESS FRACTION OF A SECOND IS SUFFI
CIENT TO INFLICT SEVERE INJURY.
The operation of any power tool can result in foreign
objects being thrown into the eyes, which can result in
severe eye damage. Always wear safety goggles complying
with ANSI Z87.1 (shown on Package) before commencing
power tool operation. Safety Goggles are available at Sears
retail or catalog stores.
READ AND FOLLOW THE INSTRUCTIONS APPEARING ON THE INSTRUCTION PLATE ON
THE FRONT OF THE BAND SAW/SANDER AND FRONT OF THE BLADE GUARD.
DANGER
....ALLOW
TOOLTO
STOP
BEFORE
ADJUSTING