Assembly, Battery, Red) cable negative – Sears 917.25559 User Manual

Page 9: Flat, Vent caps, Install, Checklist

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

ASSEMBLY

INSTALL

BATTERY

(See

Figs. 4 & 5)

A

CAUTION: Do not short Isattery termi­
nals. Before Installiiig battery, remove
metai braeeiats, wristwatch bands,
rings, etc.

Positive terminal must be connected

first to prevent sparking from acciden­
tai grounding.

Lift seat to raised position.

Open battery box door.

Lower battery into batteiy box with battery terminals

toward front of unit.

Be sure battery drain tube is attached to battery box.

» First connect RED battery cable to positive

{+)

battery

terminal with hex bolt, flat washer, lock washer and hex
nut as shown. Tighten securely.

Connect BLACK grounding cable to negative (-) bat­

tery terminal with remaining hex bolt, flat washer, lock
washer and hex nut. Tighten securely.

Close battery box door.

Open battery box door for:

inspection for secure connections (to tighten hard­

ware).

inspection for corrosion.

Testing battery.

Jumping (if required).

Periodic charging .

BATTERY

BOX DOOR

POSITIVE

(RED) CABLE

NEGATIVE

(BLACK) CABLE

FLAT ,

,

WASHER \ l-OCK WASHER

POSITIVE (+) TERMINAL

NEGATIVE

(.) TERMINAL

M

il

BATTERY
BOX DOOR —

'j

j

V

VENT CAPS

•¿)

FIG. ^

FIG. 5

^CHECKLIST

BEFORE YOU OPERATE AND ENJOY YOUR NEW

TRACTOR, WE WISH TOASSURE THAT YOU RECEIVE
THE BEST PERFORMANCE AND SATISFACTION FROM
THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

/ All assembly instructions have been completed.

/ No remaining loose parts in carton.

/ Battery is properly prepared and charged. (Minimum

1 hour at 6 amps).

/ Seat is adjusted comfortably and tightened securely.

/ All tires are properly inflated. (For shipping purposes,

the tires were over-inflated at the factory).

/ Be sure mower deck is properly leveled side-to-side/

front-to-rear for best cutting results. (Tires must be

properly inflated for leveling).

/ Check mower and drive belts. Be sure they are routed

properly around pulleys and inside all belt keepers.

/ Check wiring. See that all connections are still secure

and wires are properly clamped.

WHILE

LEARNING HOWTO USE YOUR TRACTOR, PA Y

EXTRA

ATTENTION TO

THE FOLLOWING

IMPORTANT

ITEMS:

/ Engine oil is at proper level.

/ Fuel tank is filled with fresh, dean, regular unleaded

gasoline.

/ Become familiar with all controls - their location and

function. Operate them before you start the engine.

/ Be sure brake system is in safe operating condition,

Advertising