Sears 536.886331 - Manual (Page 17)

CUSTOMER RESPONSIBILITIES
SERVICE RECORDS
Fill In dates as you com­
plete regular service
SCHEDULE
SERVICE
DATES After
First 2
hours
Before
Each
Use
As
Needed
Every
10
Hours
Every
25
Hours
Each
Season
Before
Storage
Check Engine Oil Level
Change Engine Oil
Tighten All Screws and Nuts
1/“
Check Traction Clutch Cable
Adjustment (See Cable Adjustment)
Replace Spark Plug
Adjust Drive Belts
Lubricate All Pivot Points
Lubricate Auger Shaft (See Shear
Bolt Replacement)
Lubricate Disc Drive Plate Zerk
Drain Fuel
Check Auger Clutch Cable
Adjustment (See Cable Adjustment)
GENERAL RECOMMENDATIONS
The warranty on this snow thrower does not cover items
that have been subjected to operator abuse or negli­
gence. To receive full value from the warranty, operator
must maintain snow thrower as instructed in this manual.
Some adjustments will need to be made periodically to
properly maintain your snow thrower.
All adjustments inthe Service and Adjustments sectionof
this manual should be checked at least once each
season.
AFTER FIRST USE
• Check for any loose or damaged parts.
• Tighten any loose fasteners.
• Check and maintain the auger.
• After each use. remove all snow and slush off the
snowthrowerto prevent freezing of auger or controls.
• Check contrcis to make sure they are functioning
properly.
• if any parts are worn or damaged, replace immedi­
ately.
LUBRICATION CHART
Lubricate
Disc Drive
Plate Zerk
with a Hi
Temp EI^
Moly
Grease
ubricate auger
shaft zerk
fittings.
17