Tascam 122MKIII - Manual (Page 11)

Special Features
Autoiocator Functions
□ Setting Memo 1 and
Memo 2 points
/
□ Checking Memo Points
□ Changing Memo Points
□ Erasing Memo points
□ Locating the tape
Press MEMO IN and LOG (1 or 2) together at the desired moment. The tape
counter reading at that moment is stored into memory.
o* You cannot set any memory points during repeat play or when the tape is
fast-winding as a result of pressing either LOC.
When the tape counter is reset to 00 00, your Memo points are automatically
recalculated, so that they stay the same relative to their original tape positions.
Press STOP and LOC 1/2 together and hold them. The tape counter will read
the corresponding memory point until you release the buttons.
Each time you press MEMO IN and LOC 1 or 2, a new memory point is
established and the previous memory point is erased.
All memory points are erased when you
o Turn off the deck, or
o Eject the tape.
To Memo points : Press LOC 1 to locate the tape to the Memo 1 point, and
LOC 2 to the Memo 2 point.
Auto Play : Press PLAY after LOC. The tape will automatically start playing
at the end of search operation.
Auto Pause : Press PAUSE after LOC. The transport will automatically go
into Pause mode at the end of search operation.
To 00 00 : Press RTZ.
11