Tascam 122MKIII - Manual (Page 13)

Opposite Tape Side
Leader 1 Leader f
j Tape 1 Tape )
Opposite Tape Side
▼
Opposite Tape Side
Tape Side Facing You
Leader • ------ ---------
Leader (
) Tape Tape j
Tape Side Facing You
Leader " I Leader
) Tape 1 Tape )
c>
Tape Side Facing You
Only the last example can either be in one-time, auto­
reverse HD or continuous reverseCHDmode.
Recording a Blank Space Between Programs
Pressing STOP while holding RECORD down during Record records 4 seconds of
silence, and the tape stops.
O’ When a 4-second blank space is recording, all controls are locked out
except :
STOP, RESET, MEMO IN, CZD , ZZD ( J J 2 R MKII only), and ADJUST
(122 MKIII only)
O’ 122 MKlll : If the OSC LED is lit when you press STOP and RECORD, the
deck only goes into Stop mode.
Using CPS (Computomatic Program Search) (112R MKII only)
CPS counts a blank space of about 4 seconds between selections (programs) to
locate the beginning of a specific one, letting the tape start playing after the search
operation.
1. When the tape is stopped, press STOP and MEMO IN simultaneously. The
CPS mode is activated and the tape counter displays "1."
Pressing STOP and MEMO IN in other transport modes than stop, too,
activates the CPS mode, the transport going into stop.
13