Compaq 3000 User Manual
Page 10
RAID Array 3000 Controller Shelf
EK–SMCPQ–UG. C01
xii
Chapter 4: Second Controller Option
Second Controller Option describes how to install a second (redundant) RAID
controller in the shelf for redundancy. It also contains a dual controller
installation procedure for a single serial port.
Associated Documents
In addition to this guide, refer to the following documentation to properly install
and setup your specific subsystem configuration:
Table 1 Associated Documents
Document Title
Order Number
StorageWorks RAID Array 3000 Configuration and
Maintenance Guide
EK–SMCS2–UG
7 Device, 16-Bit SBB Shelf (BA356-S Series) User’s Guide
EK-BA356-UG
StorageWorks SBB Shelf I/O Modules User’s Guide
EK-SBBIO-UG
RAID Array 3000 Getting Started for Windows NT-Intel
Installation Guide
AA-RACZA-TE
RAID Array 3000 Getting Started for Windows NT-Alpha
Installation Guide
AA-RACUA-TE
RAID Array 3000 Storage Subsystem Second Controller
Option Installation Guide
EK-SM3KC-IG
Command Console 2.1 for RAID Array 3000, User’s Guide
AA-RBF2B-TE
RETMA Shelf Rail Kit Installation Guide
EK-35XRB-IG
RETMA Bracket Installation Guide
ER-PCBAR-AA