Compaq 3000 - Manual (Page 98)

Chapter 4. Second Controller Option
EK–SMCPQ–UG. C01 4-9
4.2.6 Restore Configuration
To restore your configuration to the new controller:
1. Restart SWCC in the “Serial Mode” (refer to your RA3000 Getting Started Guide
for instructions).
2. Select the Storage pull-down menu from the Toolbar, then choose Controller.
3. From the Controller pull-down menu (Figure 4-8), select Configuration, and
then Restore.
Figure 4-8. Restoring Configuration to New Controller
The saved configuration screen with a “Restore from File” field appears as shown in
the example of Figure 4-9.