Esc "{ " n, Esc "¤" n "data" cr or lf – Citizen Systems iDP-3423 User Manual
Page 122
iDP-3420/3421/3423 User’s Manual
122
CITIZEN
ESC "{ " n
[Function]
Specifying/Canceling the inverted character print
[Code]
<1B>H <7B>H n
[Range]
0 £ n £ 255
[Outline]
This command selects/deselects inverted print. n is valid only for the least
significant bit.
n
Type
0
Deselects the inverted characters.
1
Selects the inverted characters.
[Caution]
This command is valid only if entered at the head of the line.
[Default]
n = 0
<Example>
ESC "¤" n "data" CR or LF
[Function]
Defining the message
[Code]
<1B>H <2F>H n “data” CR or LF
[Range]
1 £ n £ 10
[Outline]
This command defines up to a 50-byte message in one line. If the value of n is
specified beyond the range, the data following n will be treated as the print data.
Once the message is defined, it remains valid until it is redefined. The data
should end with CR (0DH) or LF (0AH). If the data exceeds 50 bytes, the
subsequent data will be treated as the print data.
Once the message is defined, it remains valid until it is redefined or the download
deletion command (ESC DC2 n1 n2) is executed.
When Inverted Print
Is Deselected
When Inverted Print
Is Selected
Direction