Citizen Systems iDP-3423 - Manual (Page 123)

iDP-3420/3421/3423 User’s Manual
123 CITIZEN
ESC DC3 n
[Function] Printing the message
[Code] <1B>H <13>H n
[Range] 1 £ n £ 10
[Function] This command prints a message. If the value of n is specified beyond the range,
the message will not be printed.
ESC "y" n
[Function] Setting the print lines after paper near end detection
[Code] <1B>H<79>H n
[Range] 0 £ n £ 255
[Outline] This command sets the number of print lines after paper near end detection. It
stops printing after printing n ´ 2 lines since detection of the paper near end,
resulting in the paper near end state (See 4.12 Operation Panel and Error
Indications). The PE signal (Parallel interface only) changes when the paper
near end is detected.
[Default] n = 0