Citizen Systems iDP-3423 - Manual (Page 69)

iDP-3420/3421/3423 User’s Manual
69 CITIZEN
ESC "%" n
[Function] Specifying/Canceling the download character set
[Code] <IB>H <25>H n
[Outline] This command selects/deselects the download character set. The download
characters cannot be printed by simply defining them with the above-mentioned
ESC & 0 command. To print them, send this command to the printer.
n Download Character Set
0
30
Deselects
1
31
Selects
ESC "¤" n "data" CR or LF
[Function] Defining the Message
[Code] <1B>H <2F>H n "data" CR or LF
[Range] 1 £ n £ 10
[Outline] This command can define up to a 50-byte message in one line. If the value of n
is specified beyond the range, the data following n will be treated as the print
data.
Once the message is defined, it remains valid until it is redefined. The data
should end with CR (0DH) or LF (0AH). If the data exceeds 50 bytes, the
subsequent data will be treated as the print data.
Once the message is defined, it remains valid until it is redefined or the download
deletion command (ESC DC2 n1 n2) is executed.