Ariens SNO-THRO 932 - Manual (Page 19)

Storage
A
WARNING: Never store Sno-Thro in an
enclosed area where fuel fumes may
reach flame, sparks, pilot lights or an
ignited object. Drain fuel outdoors away
from any ignition source. Use only
approved fuel container.
Your authorized Ariens Dealer is trained and
equipped to service your Sno-Thro. A periodic check
up by your dealer will help reduce your maintenance
costs.
Inspect Sno-Thro for visible signs of wear, breakage
or darhage. Order any parts required and make
necessary repairs to avoid delays when beginning
use again.
Lubricate unit according to instructions in Lubrication
and Maintenance Section of this manual.
Clean unit thoroughly. Touch up all painted areas to
avoid rust and store in a cool, dry protected place.
Remove weight from wheels by putting blocks under
frame or axle.
Engine
When storing for extended periods, we recommend
stabilization of fuel with a gum and varnish preventing
anti-oxidant stabilizer or removing all fuel from tank
and carburetor.
User Service Component
Publications are available for Sno-Thro owners who
wish to perform some of their own maintenance and
service operations. Should a complete parts and/or
repair manual be desired order under the following
part numbers.
Parts Manual
Repair Manual
Mail Requests to;
PM-932
SM-932
Ariens Service
655 West Ryan Street
Briilion, Wl 54110-1098
Components illustrated and described in this manual
are most commonly used for consumer service and
can be ordered through your Ariens Dealer. When
ordering parts always include the Model and Serial
Number to assure prompt service.
Item Part
No.
No.
1. 532005
2. 072191
072192
3. 072106
072157
Figure 14:
Description
Shear Bolt and Nut
Attachment Drive Belt (ST524)
Attachment Drive Belt (ST724)
Traction Drive Belt (ST524)
Traction Drive Belt (ST724)
17