Ariens SNO-THRO 932 - Manual (Page 2)

A Message to Ariens Customers ...
Welcome to the world of Ariens equipment. We are
pleased that you have purchased the best Sno-Thro
available. The care you give your Ariens Sno-Thro
will determine the satisfaction and service life you will
obtain from it. Use this manual as your guide. By
observing the instructions and suggestions in this
manual, your Ariens Sno-Thro will serve you well for
many years.
equipment and is ready and able to serve you. If
service is required, be prepared to supply the service
person with the Model and Serial Number of the Sno-
Thro, as well as a full description of the problem
encountered.
Your Ariens dealer will be happy to supply any
service or advice which may be required to keep your
Ariens Sno-Thro operating at peak efficiency. He
stocks genuine Ariens parts and lubricants;
manufactured with the same precision and skill as the
original equipment. His factory trained staff is kept
well informed on the best methods of servicing Ariens
NOTE: The descriptions and specifications contained
in this manual were in effect at the time the manual
was approved for printing. Ariens Company reserves
the right to discontinue models without notice and
without incurring obligation. The Sno-Thro described
within this manual may not be identified as either
standard or optional and the various illustrations may
not all be applicable to your particular unit. If you
have questions, always check with your Ariens
dealer.
Safety Alert Symbol And Notations
The following safety notations are used throughout
this manual to call attention to special information or
operating procedures. Understand the message in
each notation and be alert to unsafe conditions and
the possibility of personal injury.
A
CAUTION: A CAUTION identifies safe
operating practices or indicates unsafe
conditions that could result in personal
injury.
NOTE: A NOTE points out general reference
information regarding proper operation and
maintenance practices.
A
IMPORTANT: An IMPORTANT statement indicates
specific procedures or information that is required to
prevent damage to the machine or its attachments.
WARNING: A WARNING describes a
condition where failure to follow the
instructions couid result in severe
personal injury.
A
This safety aiert symboi is used to
attract
your attention PERSONAL
SAFETY iS iNVOLVED! When you see
this symboi - BECOME ALERT - HEED
ITS MESSAGE.
A
DANGER: A DANGER designates a
condition
where faiiure to follow
instructions or heed warning wiii most
iikely resuit in serious personai injury or
death.
0