Cal Spas LTR20051000 - Manual (Page 42)

Operating Your Spa
Button Functions
Every press will move the valve(s) one stop. The LED that is lit will move up (clockwise) to the
next available position.
Every press will move the valve(s) one stop. The LED that is lit will move down (counter-
clockwise) to the next available position.
This button moves the valve(s) to the most extreme positions. The first press will move the valve(s)
and cause the LED to travel to the top (most clockwise) position. The next press will move the
valve(s) in the other direction and the LED will move to the bottom (most counter-clockwise)
position.
Pressing this button will center the valve(s) and the center LED will be lit.
Air Venturis
Air venturis are the smaller knobs located around the top of your spa. They can also be distinguished from
diverter knobs by the arrows and the words “OFF”, “ON” and “AIR” marked on them (Figure 14). Each one
will let you add a mixture of air with the jet pressure. This is accomplished by simply rotating the air venturi
knob to the left (counter-clockwise) to increase the amount of airflow through the jets. To decrease the amount
of airflow through the jets, simply rotate the handle to the right (clockwise).
Figure 14. Air Venturis
Adjustable Therapy System™
Spas equipped with the Adjustable Therapy System™ (ATS) allow you complete control of the therapy seat
and/or lounger. This unique system offers convenient operation with its seat side controls, seven different
massage modes, and a soothing demo mode -- all at the touch of a button (Figure 15).
Page 38 2005 Spa Owner's Manual
8/1/2005