Cal Spas LTR20051000 - Manual (Page 61)

Cleaning and Maintaining Your Spa
4. Wipe spa thoroughly with a wet sponge, rinsing often in a bucket of clean water.
5. Allow the spa to dry completely.
6. Apply a coat of Cal Spas™ Fast Sheen to the spa’s entire finish with a soft cloth or sponge.
7. Allow Fast Sheen to dry until white and powdery.
8. Buff clean with a soft cloth, rotating frequently.
IMPORTANT: Cal Spas™ Fast Sheen should not be used on spas full of water. Only apply to clean, cool, dry
surfaces. Incorrect product usage may cause water clarity issues.
Removing and Reseating the Pillows
You can remove the pillows for cleaning and maintenance quickly and easily. This method works for all types
of pillows.
Grab the lower edge of the pillow with both hands firmly and pull up. As you do this, the pillow inserts will pop
out of the holes. (See Figure 22.)
Figure 22. Removing a pillow
Reseat the pillows by aligning the pillow inserts with the holes and striking the pillow hard enough to insert the
pegs back into the holes. (See Figure 23).
Figure 23. Reseating a pillow
2005 Spa Owner's Manual Page 57
8/1/2005