Conair RB70 - Manual (Page 5)

OPERATING INSTRUCTIONS
1. When placing the container on the unit base, make sure
that the unit is turned OFF and is at a complete stop. Do
not put the container on or take it off while the unit is
running. Doing so may damage the drive shaft or blade
assembly. For best results, do not fill container above
3-cup level.
2. Be sure the switch is in the OFF position and plug the
blender into a convenient outlet.
3. The Waring ® Blendor is ideal for blending ice drinks.
A hint when mixing ice drinks: keep the blades in the
container covered with liquid, turn the unit on, remove
the lid insert on top of the jar lid, and feed the ice cubes
slowly into the jar. NOTE: Never use containers other
than Waring
® Blendor containers with your unit.
4. Put ingredients into container, then put on cover. Always
add liquid ingredients first, unless otherwise specified in
recipe. Always hold container with one hand while
blending.
5. CAUTION: To avoid damage to your blender, do not run
the blender if the blades become blocked or jammed
during use. Turn the blender OFF immediately, remove
the container from the blender base and dislodge the
material that is blocking or jamming the blade.
6. NOTE: Your blender has a pulse feature located on the
front of the base (black rubber circular piece). To use,
press PULSE as needed.
7. For your safety and protection, this blender is equipped
with a thermal protector. Should your blender overheat,
the motor will automatically shut off. To restart, follow
these steps:
• Unplug blender from electrical outlet.
• Let motor cool down for approximately 2 to 5
minutes depending on the contents in the blender.
• Once the motor has cooled down, plug unit into
electrical outlet.
• Toggle to ON position and proceed.
4