Poulan PPBP30 - Manual (Page 6)

3
-
ASSEMBLY INSTRUCTIONS
3-1. ATTACH FLEX TUBB
Put the hose damp(C) on the (lex fubo(8) before connecting
(he flex tube(B) and the fan’s outlet tube(A) together.
Connect the ilex lube (B) to the (atVs outlet tube (A) (Fig.
3-1A) with a hose ctamp (0) (Fig. 3-18) and tighten
securely (Fig, 3-18).
3-1B
3-2. ATTACH OPERATING TUBE
NOTE; keep the throttie cable as straigtit as possible when
connecting (he blower tubes.
1. Place the unit on (lat surface during assembly, insure
screw mechanism o( clamp is positioned away from
operator.
2. Put tire hose damp (C) on the (lex tube(B) and the op­
erating (ube before connecting them together.
3. Turn the throttle linkage mark (D) so it aligns with the
throttle handle (F) (Fig,3-2A), insert the operating
tube (E) into the flex tube (8) (Fig. 3-2A) and then
tighten securely with a hose clamp (G) (Pig. 3-2B),
4. Attach throttle linkage clips to both ends of the flex
lube to secure the throttle cable. (Fig. 3-2D)
3-2B
riiftomt MHKftCE CUPS