Assembly instructions – Poulan PPBP30 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3
-
ASSEMBLY INSTRUCTIONS
3-3. ATTACH INTERMEDIATE TUBE AND CON
CENTRATOR NOZZLE
Coiinec;! ine intermediale tube (H) anci concentrator noz
zle (!) or 56mm nozzle (JKyou can only use one nozzle at
a time). Pusti the lubes together and turn clockwise until
they lock together (Fig. 3-3A), Use concentrator nozzle
when you need more airflow in tight places: flower beds,
under decks, etc.
3-4. ADJUST BACK PACK HARNESS AND
CONTROL HANDLE
1.
Place blower on your back by slipping arms through
the shoulder straps as if you were putting on a jacket
(Figure 3-4A).
2.
Adjust backpack harness and control handle.
3.
Once adjustments have been made to the straps for
user comfort, remove the blovjer from your back and
place on level ground in an upright position.
3-3A
3-4A