Crimestopper Security Products CS-2016DPII-FM - Manual (Page 17)

17
2 VEHICLE OPERATION
2 VEHICLE CONTROL
Your CS-2016DPII-FM remotes have the ability to control a second vehicle with a Crimestopper CS-2016DPII-
FM or older CS-2015FM system installed. See diagram below on how to switch your remote(s) to vehicle #2
operation.
To set up the 2-Vehicle operation you must
first program your remotes to Vehicle #2.
Follow the “Transmitter Programming”
steps (Pg. 15) at the second vehicle and
learn YOUR remote, along with vehicle #2’s
existing remotes.
2-VEHCLE OPERATION NOTES:
(1) You do not have to switch between
Vehicle I and II to get pages from each
vehicle. Your remote pager will receive
pages from both cars regardless of which
vehicle the pager is set to. The “I” or “II”
icon will always display with each page
indicate which vehicle the page originated
from.
(2) When programming CS-2016DPII-FM
systems, all remote/pagers and sidekick
remotes for that vehicle must be learned at
the time of programming. When you
program your remote at the second vehicle,
that vehicle’s original remote must also be
programmed. Your remote should be set in
Vehicle II and the vehicle’s original remote
should be set in Vehicle I.
Press Middle Button
for 2 seconds first,
Then you have 3
seconds to Control
vehicle #2
START
PM
CS-2016DP-FM
Press & hold side button
for 5 seconds. Remote
will beep and "II" icon will
appear in lower right LCD.
"Sidekick"
VEHICLE #2 CONTROL:
Remote