Evenflo Symphony 65 - Manual (Page 12)

20
To install this child restraint properly in the rear-facing
position, the lower anchor connector assembly MUST
be in the rear-facing belt path, as shown on the next
page (seat pad has been removed for clarity). If the lower
anchor connector assembly is in the forward-facing belt
path (shown on next page), use the following procedures
to move it to the rear-facing belt path.
To access the lower anchor connector assembly, you will
first need to:
• Loosen internal harness straps (p. 16);
• Disconnect SureLatch lower anchor connectors or
Quick Connector lower anchor connectors (p. 52);
• Remove the seat pad (p. 57).
Moving Lower Anchor Connector
Assembly to Rear-facing Belt Path
Which Type of Lower Anchor Connector
Is on Your Child Restraint?
Your child restraint will have one of the two types of
lower anchor connecters shown below. Follow the in-
structions on the following pages to properly install the
lower anchor connector assembly on your child restraint.
SureLatch Connector Quick Connector
21
Lower Anchor Connector
Assembly in
Rear-facing Belt Path
Lower Anchor Connector
Assembly in
Forward-facing Belt Path
Rear-facing
Lower Anchor Connector
Assembly in
Rear-facing Belt Path
Lower Anchor Connector
Assembly in
Forward-facing Belt Path
Moving Lower Anchor Connector
Assembly to Rear-facing Belt Path
SureLatch
Quick Connector