Forward-facing installation with seat belt – Evenflo Symphony 65 User Manual

Page 21

Advertising
background image

For

ward-facing

38

buckle

storage

5. Connect and tighten

tether strap.

Connect the tether hook
to the vehicle tether an-
chor behind the vehicle
seat, as shown. (Please

IMPORTANT: If your tether strap is too short to reach
from your child restraint to your vehicle tether anchor,
you will need a Tether Extender. Please call ParentLink (see
back cover).

buckle

storage

Forward-facing Installation with Lower

Anchor Connectors

Notice

Your child restraint is equipped with one of two types of
tether adjusters: standard (shown above) or the TruTeth-
er™ (shown below). If your child restraint is equipped with
the TruTether adjuster, refer to page 54 for information
about proper tightening.

TruTether Adjuster

Tightness Indicator

Display

buckle

storage

OWNER’S MANUAL

Keep for future use.

Symphony

Child Restraint System

Forward-facing Installation with Seat Belt

1. Disconnect tether

hook from the back

of the child

restraint.

IMPORTANT:
If you are using lower anchor connectors to secure the

child restraint, DO NOT

use the vehicle seat belt.

Before installing this child restraint forward-facing with

the vehicle seat belt, you MUST move the LATCH as-
sembly to the

rear-facing belt path so that it does not

interfere with the vehicle seat belt. Refer to page 20 to 22
for instructions on moving the SureLatch connectors or
Quick Connectors to the rear-facing belt path.

Make sure the SureLatch or Quick Connectors are at-

tached to the storage D-rings on the seat pad

.

2. Place the child

restraint in position.

Make sure child restraint
is in

Recline Position #2 or

#3 (p. 53).

Set child restraint on the

vehicle seat in the for-
ward-facing
position,
as shown. Lay the tether
strap over the back of the
vehicle seat.

Tether Strap

IMPORTANT: NEVER use

Recline Position #1 for forward-

facing, AND NEVER use

Recline Position #2 with children

who weigh more than 18 kg (40 lbs).

39

consult your vehicle owner’s manual, as tether anchor
locations may vary.) Pull the strap and tighten the tether
securely.

Advertising