Evenflo Symphony 65 - Manual (Page 18)

32
Which Type of Lower Anchor Connector
Is on Your Child Restraint?
SureLatch Connector Quick Connector
Your child restraint will have one of the two types of
lower anchor connecters shown below. Follow the in-
structions on the following pages to properly install the
lower anchor connector assembly on your child restraint.
To install this child restraint properly in the forward-facing
position, the lower anchor connector assembly MUST
be in the forward-facing belt path, as shown on the next
page (seat pad has been removed for clarity). If the lower
anchor connector assembly is in the rear-facing belt path
(shown on the next page), use the following procedures
to move it to the forward-facing belt path.
To access the lower anchor connector assembly, you will
first need to:
• Loosen internal harness straps (p. 16);
• Disconnect SureLatch lower anchor connectors or
Quick Connector lower anchor connectors (p. 52);
• Remove seat pad (p. 57).
Moving Lower Anchor Connector
Assembly to Forward-facing Belt Path
33
Lower Anchor Connector
Assembly in
Rear-facing Belt Path
Lower Anchor Connector
Assembly in
Forward-facing Belt Path
Moving Lower Anchor Connector
Assembly to Forward-facing Belt Path
Lower Anchor Connector
Assembly in
Rear-facing Belt Path
Lower Anchor Connector
Assembly in
Forward-facing Belt Path
For
ward-facing
SureLatch
Quick Connector