Lexmark E260dn - Manual (Page 18)

An optional memory card can be purchased separately and attached to the system board. To install the memory card:
1 Turn the printer off.
2 Access the system board.
3 Unpack the memory card.
Note: Avoid touching the connection points along the edge of the card.
4 Align the memory card with its connector on the system board.
5 Push open the latches on both ends of the memory connector.
Warning—Potential Damage: Memory cards are easily damaged by static electricity. Touch a grounded metal
surface before you touch a memory card.
Note: Memory cards designed for other printers may not work with your printer.
6 Push the memory card into the connector until the latches click into place.
Additional printer setup
18